久久艹视频国产视频|精品国产白嫩校花在线|少妇高潮惨叫久久久久久|欧美日韩国产在线一区不卡|日韩精品欧美精品国产精品|国产精品吹潮在线观看中文|精品日韩一区二区三区久久久|色欲视频一区二区三区在线观看

1. The vortex flowmeter sensor should be installed on a pipe corresponding to its nominal diameter, which is horizontal, vertical or inclined (the flow of fluid flows from bottom to top);

2. Avoid installing on pipes with mechanical vibration. When vibration is unavoidable,

It should be considered to add a fixed support frame to the straight pipe section about 2DN from the front and rear of the sensor;

3. Avoid installing in places with strong electromagnetic field interference, heat radiation, corrosive gas, small space and inconvenient maintenance;

4. In the case of measuring gas, temperature and pressure compensation of the measured fluid is required;

When the measured medium contains many impurities, a filter should be installed beyond the length required by the upstream straight pipe section of the sensor;

5. The upstream and downstream of the sensor should be equipped with a certain length of straight pipe section, and the inner wall of the straight pipe section should be clean and smooth.

There is no obvious bumps, fouling, peeling, etc. The pipes near the liquid sensor should be filled with the liquid to be measured.

Want to know more about precession vortex flowmeter, thermal gas mass flowmeter, electromagnetic flowmeter,

For more knowledge of Kaifeng vortex flowmeter, turbine flowmeter and ultrasonic flowmeter, please pay attention to the official website of Hollysys Industrial Control Instruments.